Got it working, it was my fault a bad connection at the transition wires from
the tuning tubes.
Thanks for the help and suggestions.
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org] On Behalf Of AD5VJ Bob
> Sent: Sunday, July 27, 2008 12:16 AM
> To: email@example.com
> Subject: [TowerTalk] TitanDX Experience anyone
> I am wanting to eventually mount my TitanDX Vertical to the
> top of my new tower, but there is a problem it would seem.
> Hope someone has one and can help me.
> I just spent the better part of the day meticulously putting
> back together my TitanDx Vertical that I had up at the other
> QTH, after setting it up at about 10 feet for a quick check
> before mounting the counter poise, guy wires, ect I
> discovered that it is not tuning on any bands.
> I can hear, but barely, compared to my Butternut there is
> about a 20 DB difference in signal strength.
> Thinking perhaps the coax was shorted, I checked it shield to
> center and it is open. I then checked with my trusty DVM on
> continuity from shield to the lower portion of the main
> tubing and it tests as shorted (from center open), from the
> upper portion of the main tubing everything tests as an open.
> I double checked my construction against the manual and all
> is well. All screws tight and in the correct place.
> Does anyone know how to check to see if the coax is open.
> Since it has the 80 meter CAP at the top, I am not sure how
> to check to make sure the center pin is good to the antenna.
> Any other ideas for checking would be greatly appreciated as
> well, first time out troubleshooting this bear.
> 73 fer nw es gud DX,
> QSL VIA: LotW, BUR, e-QSL
> Bob AD5VJ
> Old Calls WB5ZQU, WY5L/KH3, KE5CTY, N5IET
> Luke 14:28-30
> 28"Suppose one of you wants to build a tower. Will he not
> first sit down and estimate the cost to see if he has enough
> money to complete it? 29For if he lays the foundation and is
> not able to finish it, everyone who sees it will ridicule
> him, 30saying, 'This fellow began to build and was not able
> to finish.'
> TowerTalk mailing list
TowerTalk mailing list