[Top] [All Lists]

Re: [TowerTalk] Tailtwister Rotor wires

To: <>
Subject: Re: [TowerTalk] Tailtwister Rotor wires
Date: Tue, 5 Aug 2008 02:07:30 +0000
List-post: <">>
One of the locals had a great scheme, once you connect the larger
motor wires the rest follow the Resistor Color Code (B-B-R-O, etc).
No need to write anything down.
73, Dick, W1KSZ

> From:> To:> Date: Mon, 4 Aug 2008 
> 20:46:39 -0500> Subject: [TowerTalk] Tailtwister Rotor wires> > OK, I admit 
> to screwing up. but it was for a good cause.> Local was doing tower work and 
> had rotor problems. I volunteered to come > home and get my TX2 control box 
> in case his was bad.> I wrote down the color code when I took off the wires 
> and have now lost the > little piece of paper I used.> > I think I have it 
> right as the manual has the color codes, it has just been > up too long to be 
> sure.> > I see in the manual a way to check resistance on the wires.> Is this 
> the only way to try and figure out the wiring or do I have to get > someone 
> up the tower to check?> Yeah it was a dumb move, but all for a good cause at 
> the time.> Art K5FNQ> > _______________________________________________> > > 
> > _______________________________________________> TowerTalk mailing list> 

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>