[Top] [All Lists]

Re: [TowerTalk] Tailtwister Rotor wires

To: <>
Subject: Re: [TowerTalk] Tailtwister Rotor wires
From: "Kyle Chavis" <>
Date: Mon, 4 Aug 2008 22:18:14 -0400
List-post: <">>
I do it alphabetical that way I never forgot, well most of the time I know
my ABC's.

Connect the larger wires to motor then Blue, Brown, Green, White, Yellow,
you get he idea.

-----Original Message-----
Sent: Monday, August 04, 2008 10:08 PM
Subject: Re: [TowerTalk] Tailtwister Rotor wires

One of the locals had a great scheme, once you connect the larger
motor wires the rest follow the Resistor Color Code (B-B-R-O, etc).
No need to write anything down.
73, Dick, W1KSZ

> From:> To:> Date: Mon, 4 Aug 2008
20:46:39 -0500> Subject: [TowerTalk] Tailtwister Rotor wires> > OK, I admit
to screwing up. but it was for a good cause.> Local was doing tower work and
had rotor problems. I volunteered to come > home and get my TX2 control box
in case his was bad.> I wrote down the color code when I took off the wires
and have now lost the > little piece of paper I used.> > I think I have it
right as the manual has the color codes, it has just been > up too long to
be sure.> > I see in the manual a way to check resistance on the wires.> Is
this the only way to try and figure out the wiring or do I have to get >
someone up the tower to check?> Yeah it was a dumb move, but all for a good
cause at the time.> Art K5FNQ> >
_______________________________________________> > > >
_______________________________________________> TowerTalk mailing list>>

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>