Alphabetical has always worked to me!
----- Original Message -----
From: "RICHARD SOLOMON" <email@example.com>
Sent: Monday, August 04, 2008 7:07 PM
Subject: Re: [TowerTalk] Tailtwister Rotor wires
> One of the locals had a great scheme, once you connect the larger
> motor wires the rest follow the Resistor Color Code (B-B-R-O, etc).
> No need to write anything down.
> 73, Dick, W1KSZ
>> From: firstname.lastname@example.org> To: email@example.com> Date: Mon, 4 Aug 2008
>> 20:46:39 -0500> Subject: [TowerTalk] Tailtwister Rotor wires> > OK, I
>> admit to screwing up. but it was for a good cause.> Local was doing tower
>> work and had rotor problems. I volunteered to come > home and get my TX2
>> control box in case his was bad.> I wrote down the color code when I took
>> off the wires and have now lost the > little piece of paper I used.> > I
>> think I have it right as the manual has the color codes, it has just been
>> > up too long to be sure.> > I see in the manual a way to check
>> resistance on the wires.> Is this the only way to try and figure out the
>> wiring or do I have to get > someone up the tower to check?> Yeah it was
>> a dumb move, but all for a good cause at the time.> Art K5FNQ> >
>> _______________________________________________> > > >
>> _______________________________________________> TowerTalk mailing list>
> TowerTalk mailing list
TowerTalk mailing list