Thanks, Lou...Very helpful!!
--- On Thu, 8/7/08, Lou Laderman <email@example.com> wrote:
From: Lou Laderman <firstname.lastname@example.org>
Subject: Re: [TowerTalk] Antenna Interaction
To: email@example.com, firstname.lastname@example.org
Date: Thursday, August 7, 2008, 11:52 AM
I sent this link in reply to another similar question a couple of days ago.
Issue is not interference with the SteppIR from the VHF/UHF, but with the
VHF/UHF antennas by the SteppIR. Big advantage of the SteppIR is that it can
"disappear" when the elements are retracted.
>From: Edward Sylvester <email@example.com>
>Sent: Aug 7, 2008 1:39 PM
>Subject: [TowerTalk] Antenna Interaction
>Due to only having one tower and a 10' mast, I would like to see
whether it's feasible to put up the following: Steppir 3 element
(bottom) 12 element 2m horz beam with UHF 21 element horz beam at same level on
metal cross boom, sitting two feet above LPDA (50-1300 MHz) at the top,
vertically polarized. How much will the the V/UHF antenna setup two feet above
affect the Steppir pattern?? Thanks,Ed NI6SWhittier, CA
>TowerTalk mailing list
TowerTalk mailing list