[Top] [All Lists]

Re: [TowerTalk] Fwd: Heights Towers Aluminum??

Subject: Re: [TowerTalk] Fwd: Heights Towers Aluminum??
Date: Fri, 15 Aug 2008 13:38:30 EDT
List-post: <">>
I am glad to get this information. The Height tower I have in my yard  just  
now is old. I noticed that some of the weld or the Z have opened  and was 
to fix that before I put the tower up. Now I may get all  the welds inspected 
before I put it up. I looked at the welds before  and wondered if they were 
OK,  but as I am not an expert I thought they  were OK. The welds that brook 
under high tention after the Z itself  bent at these places.

Hans  N2JFS
I have found that wire brushing reveals some of the hairline cracks that  
oxidation has covered up.  Also, check on the inside of the weld  joint.  I 
discovered some hairlines there, that were not showing on  the outside of the 

**************Looking for a car that's sporty, fun and fits in your budget? 
Read reviews on AOL Autos.      

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>