[Top] [All Lists]

Re: [TowerTalk] M2 2800 question

Subject: Re: [TowerTalk] M2 2800 question
Date: Mon, 25 Aug 2008 08:51:54 EDT
List-post: <">>
In a message dated 8/24/2008 9:02:02 P.M. Pacific Daylight Time, writes:

>  I'm getting ready to install my new M2 2800 rotor. I ordered  one of 
Champion Radios mast clamp for the rotor. I'm wondering if I should  put the 
little  "centerer" peice that M2 sends with the rotor. I  thought I read 
somewhere that it also keeps that bolt from backing out. Is  this true?
    Umm, my first thought would be to contact  Champion Radio Products. I'm 
sure what they'll tell you is to leave the small  bolt and bushing in the top 
of the turntable and that the Champion clamp has a  hole in the middle to 
accommodate it. You don't need the centering pyramid;  the clamp will 
self-center a 
2" mast. 
    With the bolt not installed, I found that water  stands in the turntable 
hole indicating to me that there's a bottom to the  hole so no harm if it 
isn't installed. 
Steve    K7LXC
Champion Radio Products
_www.championradio.com_ ( 
Cell: 206-890-4188


**************It's only a deal if it's where you want to go. Find your travel 
deal here.      

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>