In my catalog it is drawing a871298 'foundation detail bracketed 25
tower'... this is a march 1991 catalog. Basically 4' deep and 2' either
diameter or square side. And this drawing shows no rebar, only an embedded
tower section or short-base section.
David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: email@example.com [mailto:towertalk-
> firstname.lastname@example.org] On Behalf Of Jeff Stevens
> Sent: Thursday, August 28, 2008 21:42
> To: email@example.com
> Subject: [TowerTalk] Bracketed Rohn 25G Concrete Base Size
> Does anyone have a copy of drawing C850506? It provides the concrete
> base dimensions for Rohn 25 bracketed installations. It's nowhere to be
> found in the most recent catalog nor is there anything else that is
> specific to concrete bases for bracketed installations.
> My plan is to go with the foundation required by an equivalent guyed
> tower (actually I'm going with one size larger for a number of reasons).
> This base, I believe, is a bit larger than what the drawing in question
> requires, however I need still need a copy of it to verify.
> Alternatively, maybe I overlooked something in the current catalog.
> For reference, the total height will be 28', bracket will be at 16' and
> the mast will hold beams for 6m, 2m, and 70cm.
> If anyone can send me a copy of C850506 it would be very appreciated!
> TowerTalk mailing list
TowerTalk mailing list