Towertalk
[Top] [All Lists]

Re: [TowerTalk] Dimensions of a tower concrete base

To: Bert Almemo <balmemo@sympatico.ca>
Subject: Re: [TowerTalk] Dimensions of a tower concrete base
From: David Gilbert <xdavid@cis-broadband.com>
Date: Mon, 01 Sep 2008 12:33:43 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I don't think there is a valid general answer to that question.  It 
depends upon whether you're talking a free-standing tower or a guyed 
one, and what kind of soil conditions (viscosity, etc) you have.  Deep 
and narrow, for example, might give the best performance under a 
free-standing tower for a given amount of concrete if placed in really 
hard soil, but wide and shallow would probably work better for loose 
sand.  I'm not an expert on it, but I suspect that the total mass of 
concrete is more relevant for a guyed tower.

Depending upon how large a structure you're planning, you should be 
relying on a good local engineer for that information if you don't have 
tower specs to go by, and even the tower specs may not be completely 
valid if you have particularly unusual soil at your QTH.

73,
Dave   AB7E



Bert Almemo wrote:
> In general, is it better to go deep than wide when digging for a tower base,
> i.e. does a deeper base give better support than a shallower one with
> basically the same volume? Is 3x3x6 better than 4x4x4 with everything else
> being equal. Thanks.
>
> 73 Bert, VE3OBU
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>