Towertalk
[Top] [All Lists]

Re: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering Fixture

To: "'Michael Ryan'" <mryan001@tampabay.rr.com>, "'Don Tucker'" <w7wll@arrl.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering Fixture
From: "Allen R. Brier" <n5xz@earthlink.net>
Reply-to: n5xz@earthlink.net
Date: Thu, 18 Sep 2008 19:17:16 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
That was my biggest worry when I lifted the tower into position with the
crane: will the bolt holes line up?? (They did and perfectly, too). I dug a
4 x 5 x 9 hole here and dropped the obligatory DX QSL cards into it when I
poured the cement (including, of course, a JT card). Some of the other list
members will remember this offering to the DX Gods. It seems to have worked,
too, because the antenna (4 el SteppIR) works GREAT! Also, I suffered no
damage to the tower or antenna with Ike. I was out of town, but my wife
reported that the tower "didn't budge an inch" with the 75 MPH winds and 90
MPH gusts.

Allen Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77468-2533
281-342-1882
713-705-4801 (Cell)
n5xz@arrl.net

-----Original Message-----
From: Michael Ryan [mailto:mryan001@tampabay.rr.com] 
Sent: Thursday, September 18, 2008 9:57 AM
To: n5xz@earthlink.net; 'Don Tucker'; towertalk@contesting.com
Subject: RE: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering
Fixture

I bought the base from MFJ and paid the freight. It was worth it. The base
'ears' have to be JUST right or you will not get the bolts through those
holes. Be sure to find the drawings on the concrete base, rebar, etc.  Big
hole here....5 x 5 x 9- a bit larger than required but I am along the water
in a hurricane zone so a little overkill helps me sleep better you might
say.  -'73 and good luck.  - Mike

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Allen R. Brier
Sent: Thursday, September 18, 2008 1:15 PM
To: 'Michael Ryan'; 'Don Tucker'; towertalk@contesting.com
Subject: Re: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering
Fixture

I'm open to any suggestions...

Note that Hy-Gain/MFJ still sells the rebar base for the HG70HD. The cost is
$350.00 and $150.00 for shipping. I bought one because I was thinking about
the liability aspect if the tower were to ever fall and cause damage or
injury...how would it look if the homemade base failed? I can say that
during Ike, (I live about 40 miles west of where the eye of the storm
tracked) that my wife said my tower "didn't move an inch!" and my 4
el-SteppIR didn't suffer any damage. We had 70-80 MPH winds with 90 MPH
gusts. I was conveniently out of town.

Allen Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77468-2533
281-342-1882
713-705-4801 (Cell)
n5xz@arrl.net
-----Original Message-----
From: Michael Ryan [mailto:mryan001@tampabay.rr.com] 
Sent: Thursday, September 18, 2008 8:27 AM
To: n5xz@earthlink.net; 'Don Tucker'; towertalk@contesting.com
Subject: RE: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering
Fixture

I wouldn't mind having one myself but I think that chances of finding one
are slim. BUT...BLAKE, N4GI had an idea of adapting another brand for use on
this tower. Perhaps he can tell us, and remind me, of what he used to lower
my tower when he took it down a couple of years ago.  It apparently worked
well enough for him, so that's good enough for me.  - Mike

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Allen R. Brier
Sent: Thursday, September 18, 2008 12:13 PM
To: 'Don Tucker'; towertalk@contesting.com
Subject: Re: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering
Fixture

I am looking for one as well.

Allen Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77468-2533
281-342-1882
713-705-4801 (Cell)
n5xz@arrl.net
-----Original Message-----
From: Don Tucker [mailto:w7wll@arrl.net] 
Sent: Tuesday, September 16, 2008 9:18 PM
To: towertalk@contesting.com
Subject: [TowerTalk] HyGain HG-70HD Crankup Tower Raising/Lowering Fixture

Getting to old for ladders.  Looking for a HyGain Raising/Lowering Fixture 
that was sold for use with the HG-70HD crankup tower (and probably other 
models). Sold as a HG-GP Gin Pole. Current HyGain (now MFJ) has nothing of 
the old tower stuff.

Don W7WLL 



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

__________ NOD32 3452 (20080918) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


__________ NOD32 3452 (20080918) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>