[Top] [All Lists]

Re: [TowerTalk] GiNPOLE PULLEY

Subject: Re: [TowerTalk] GiNPOLE PULLEY
Date: Fri, 31 Oct 2008 23:19:47 -0500
List-post: <">> wrote:>
>         Do you need it because of over-galvanizing? I just use a round
>     file to get the rough edges off. Works fine.
>     Cheers,
>     Steve     K7LXC

no, some of these ends are so mis shapen that I cannot get a male onto 
a female... so a mandrel to drive into the female to reset its 
"roundness" and a suitable tool for the male to get it so that it will 
slip fit into the male.  of course, you simply have to number these 
sections AFTER try fitting them together on the ground.

thanks chas

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] GiNPOLE PULLEY, chasm <=