[Top] [All Lists]

[TowerTalk] Rotor Plate LM-470

Subject: [TowerTalk] Rotor Plate LM-470
Date: Sun, 2 Nov 2008 18:01:45 EST
List-post: <">>
That is the way the plate works, hooks over the  cross bars, torques against 
the uprights.  Works fine, I have had three  LM-470's using Ham M or Prop 
Pitch motors and never a problem.  The weight  of the mast holds it secure.

Norm  W4QN
Message: 1
Date: Sun, 2 Nov 2008  09:33:31 -0500
From: "Terry G. Glagowski"  <>
Subject: [TowerTalk] LM470D Rotator  Plate
To: <>
Message-ID:  <000a01c93cf7$fb1d4d40$f157e7c0$@net>
Content-Type:  text/plain;    charset="us-ascii"

Does anyone know how the  rotator plate for an LM470D stays fastened to the 
section of the crank-up  tower?

Mine doesn't have any means of fastening, but it force fits into  the tower 
would probably stay there if the rotator, mast, and thrust  bearing were in

Is there a better way or what?

Terry /  W1TR  

**************Plan your next getaway with AOL Travel.  Check out Today's Hot 
5 Travel Deals! 

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Rotor Plate LM-470, NPAlex <=