I would guess the problem is not coming from the rotor control box, but from
the cable (Or power cable) coming out of the box acting as a antenna.
Try separating the rotor cable from the other cables of your station or try
some split beads on the Rotor cables.
If it was me I would just leave the ground wire off the MFJ.
--- On Sat, 11/8/08, Jorge Diez - CX6VM <email@example.com> wrote:
> From: Jorge Diez - CX6VM <firstname.lastname@example.org>
> Subject: Re: [TowerTalk] RF in rotor control ?
> To: email@example.com
> Date: Saturday, November 8, 2008, 6:48 AM
> Hi Steve,
> Prosistel control (original with PST61D rotor). From
> control to MFJ-434 is 1
> I disconected the ground from MFJ-434 to get it longer from
> controller and
> no problem. Seems the problem is when conected to
> I put the MFJ-434 again 1 feet from the rotor control
> WITHOUT ground and no
> problem. I connect the ground and start the problem. I
> disconnect again the
> ground and NO problem... Incredible...
> I don´t know how to know if there´s PWM...
TowerTalk mailing list