Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ground Plane Model Problem

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Ground Plane Model Problem
From: Steve Hunt <steve@karinya.net>
Date: Wed, 19 Nov 2008 14:34:38 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Tom,

A quarter-wave vertical over a perfect ground would be about 35 Ohms, 
not 50-75 Ohms. But 10 Ohms still looks odd.

Can you post a copy of the EZNEC file somewhere so that we can take a look?

73,
Steve G3TXQ

K0SN wrote:
> Gentlemen:
> I have been modeling a ground plane vertical antenna with elevated radials.
> It's made of 3" aluminum tubing at a base height of about 15 feet.
> My problem is EZNEC is reporting the feedpoint impedance to be
> around 10 ohms, which disagrees with the conventional wisdom that
> says it should be in the vicinity of 50-75 ohms. Any suggestions? Has
> anyone encountered a similar problem while running EZNEC or another
> modeling program? Any input would be appreciated.
> Tom K0SN
> Porterfield, WI
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>   

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>