[Top] [All Lists]

Re: [TowerTalk] EZ Way Tower "Wonder Post"

To: <>
Subject: Re: [TowerTalk] EZ Way Tower "Wonder Post"
From: "Larry" <>
Reply-to: Larry <>
Date: Thu, 20 Nov 2008 09:09:57 -0500
List-post: <">>
I had an EZ-way tower at one time (72 footer). The WonderPost was about 10 
(+/-) inches in diameter as I recall and about 10 feet tall. At the top of 
the post was a hinge where the tower was bolted - sort of like a door hinge 
only much larger. The base of the post was mounted with several one inch (I 
think) bolts set in the concrete base.

I was amused that installation instructions suggested perhaps using 
scaffolding to walk the tower up to attach to the hinge. The tower only 
weighed about 700 lbs and the mount point of the tower was not quite as far 
up as the height of the post. I hired a crane and it took 30 minutes to get 
the tower attached to the post - most of the time was for the crane operator 
to maneuver the crane in a very tight place to actually lift the tower. The 
crane was about 50 feet away from the base and when the operator picked up 
the tower and put it by post the mounting holes of the tower and post were 
off alignment by maybe as much as 0.5 inch and easily moved into alignment.

Good luck.

73, Larry  W6NWS
----- Original Message ----- 
From: <>
To: <>
Sent: Thursday, November 20, 2008 8:19 AM
Subject: [TowerTalk] EZ Way Tower "Wonder Post"

>I think I have the top half of a RBS-40 tower.? We measured it at 25 feet.? 
>I am looking for a link to the specifications (dimensions) of the Wonder 
>Post as we intend to fabricate one.? In addition, any information as to its 
>connection to the tower would be appreciated.? Also, I am looking for 
>information on the house bracket as to its size, gauge, and dimensions.
> Thanks in advance.? You can email me at mycall @
> Noel?? N2OEL
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>