I am a rookie at all this... so please be patient. I thought the
to the tuner said you have to reduce power to the antenna-tuner and
tune with like only 5-10 watts of power, and then put the power back
up. I guess you are saying you would have to take the amp off line
or tune it way low, and then tune the antenna... and then either put the
amp back on line, or re-tune the amp up to power each time you
re-tuned the antenna.
Is there something I am missing here?
============== Richards - K8JHR ===================
Richard Thorne wrote:
> The only problem I can see with this tuner is not having the ability to
> break the PTT line between the rig and amplifier (confirmed by Array
> A high power tuner should operate like the SGC-500 or the 1500 wat MFJ
> auto tuner. When a tuning cycle begins it should interrupt the ptt line
> to the amp so it can tune under low power, then when the tuning cycle is
> complete, allow the ptt line to key the amp.
TowerTalk mailing list