If it is not close to a building, you can use two guy ropes, one on
each side - set perpendicular to the to the rope, cable, or whatever
you are using to raise and lower it. Of course, that may be helpful
only after you get it down once... unless you can lasso it from overhead
and get it to catch now... but next time that will make it easy. You can
lash the ropes against the pipe like flag halyards if you like when it is
not being lowered.
Well... it might work... maybe.
================== K8JHR ======================
Mike Bragassa wrote:
>
> Looking for suggestions on how best to support a 27' x 3/8"
> wall chrome molly mast while lowering it into the tower to
> access the antennas at the top.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|