Solder the copper coax into an eye, use stainless hardware and sandwich the
eye between ss nuts on a bolt through the element, and add a bit of your
favorite conductive goop and it should be good.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Dan Edward Dba East edwards [mailto:dan.n.edwards@sbcglobal.net]
> Sent: Tuesday, March 10, 2009 21:54
> To: towertalk@contesting.com
> Subject: [TowerTalk] yagi feedpoint connections.........
>
> has anyone solved the problem of dis-similar metal galvanic corrosion?
>
> aluminum elements, copper coax. penetrox and tape still the only answer?
>
> we're repairing the hurricane damage at W5WMU.
>
> thanks
>
> dan, W5XZ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|