Towertalk
[Top] [All Lists]

Re: [TowerTalk] MACAntenna

To: Rex Lint <rex@lint.mv.com>
Subject: Re: [TowerTalk] MACAntenna
From: David Gilbert <xdavid@cis-broadband.com>
Date: Fri, 22 May 2009 12:27:54 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I give up ...

Dave   AB7E


Rex Lint wrote:
> Dave,
>
> I was thinking that a radiator had 2 ends.  You corrected me:  it has an
> end.  I was referring to what must be a beginning. Therefore I agree.  At
> the beginning, however, there is some current flow.
>
>       -Rex-
>  
>      K1HI
>        Rex Lint
>        Merrimack, NH 
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of David Gilbert
> Sent: Thursday, May 21, 2009 12:52 AM
> To: Rex Lint
> Cc: 'TowerTalk'; 'Arthur Trampler'
> Subject: Re: [TowerTalk] MACAntenna
>
>
> No it doesn't.  The end is the end, and there isn't any current flow at 
> the end of a wire ... unless you have arcing out into the air or 
> something obscure like that..
>
> Besides, he was clearly referring to the portion of the wire connected 
> to the relays.  That's an end.
>
> Dave   AB7E
>
>
>
> Rex Lint wrote:
>   
>> "And no, the voltage is a maximum at the end of a radiator ... how can 
>> you have current flow at that point when there is no place for it to
>>     
> go???"
>   
>> ... depends on which end...
>>
>>       -Rex-
>>  
>>      K1HI
>>        Rex Lint
>>        Merrimack, NH
>>
>>
>> -----Original Message-----
>> From: towertalk-bounces@contesting.com
>> [mailto:towertalk-bounces@contesting.com] On Behalf Of David Gilbert
>> Sent: Wednesday, May 20, 2009 2:48 PM
>> To: Arthur Trampler; TowerTalk
>> Subject: Re: [TowerTalk] MACAntenna
>>
>>
>> That's like saying a 2 inch air gap is going to break down at the same 
>> voltage as a 1 inch air gap because the first inch will break down and 
>> then the second.
>>
>> And no, the voltage is a maximum at the end of a radiator ... how can 
>> you have current flow at that point when there is no place for it to go???
>>
>> Dave   AB7E
>>
>>
>>
>>
>> Arthur Trampler wrote:
>>   
>>     
>>> By putting two relays in series, don't you create a situation where there
>>>     
>>>       
>> would be a voltage breakdown nearest the RF, and then a second voltage
>> breakdown/arc at the second relay?
>>   
>>     
>>>  
>>> I guess I'm not seeing how two in series increases voltage handling, as
>>>       
> to
>   
>>>     
>>>       
>> me it would seem that the relay with RF on one side is still the same size
>> and as prone to arcing at a given voltage.
>>   
>>     
>>>  
>>> However, isn't voltage at a minimum at the end of a full-sized 1/4 wave
>>>     
>>>       
>> radiator (half of a dipole) and current at a maximum?
>>   
>>     
>>>  
>>> Art
>>>     
>>>       
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>   
>>     
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>