Had the exact same problem with my 25G and the rotor plate. Had to cut
some of the cross-pieces up near the top to get it to fit in.
Dave Johnson wrote:
> I have installed or worked on more than 50 Rohn towers in my 34 years as a
> ham but this is a new one on me. I was installing a used 25G tower for
> another ham and he had bought a new rotor plate but it wouldn't fit in the
> top section. I thought there must be something wrong with that plate so I
> brought it home and tried it in a top section that I have here. It fit
> perfectly. I have several old Rohn 25 rotor plates so I tried one of them in
> his top section and still no joy. This top section is to small at the place
> near the top where the rotor is supposed to go. Has anyone seen this before?
> Dave - K4SSU
73 de W5NNH
10X 75371/M&M 117/SMIRK 6185/Six Club 285/TRA 2499/Norcross 228 F&AM
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 090606-0, 06/06/2009
Tested on: 6/6/2009 11:14:50 PM
avast! - copyright (c) 1988-2009 ALWIL Software.
TowerTalk mailing list