[Top] [All Lists]

Re: [TowerTalk] rotor plate

To: Dave Johnson <>
Subject: Re: [TowerTalk] rotor plate
From: John Kemker <>
Date: Sat, 06 Jun 2009 23:14:50 -0400
List-post: <">>
Had the exact same problem with my 25G and the rotor plate.  Had to cut 
some of the cross-pieces up near the top to get it to fit in.

Dave Johnson wrote:
> I have installed or worked on more than 50 Rohn towers in my 34 years as a 
> ham but this is a new one on me.  I was installing a used 25G tower for 
> another ham and he had bought a new rotor plate but it wouldn't fit in the 
> top section.  I thought there must be something wrong with that plate so I 
> brought it home and tried it in a top section that I have here.  It fit 
> perfectly.  I have several old Rohn 25 rotor plates so I tried one of them in 
> his top section and still no joy.  This top section is to small at the place 
> near the top where the rotor is supposed to go.  Has anyone seen this before?
> Dave - K4SSU

73 de W5NNH
10X 75371/M&M 117/SMIRK 6185/Six Club 285/TRA 2499/Norcross 228 F&AM

avast! Antivirus: Outbound message clean.
Virus Database (VPS): 090606-0, 06/06/2009
Tested on: 6/6/2009 11:14:50 PM
avast! - copyright (c) 1988-2009 ALWIL Software.


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>