[Top] [All Lists]

[TowerTalk] Thrust bearing / rotor load

To: "" <>
Subject: [TowerTalk] Thrust bearing / rotor load
From: JP Lyet <>
Date: Fri, 12 Jun 2009 02:41:56 -0400
List-post: <">>
Altho this thread may have worn thin, after reviewing the archives, it  
is still unclear as to the proper (most accepted) method to distribute  
the load. Conceptually, should the TB-2 or T2X take the majority of a  
100# load?  This TB has a locking ring and single(1) set screw. A mast  
locking collar is welded to the bottom of the upper support plate for  
installation adjustment purposes.
Prior to mounting the antenna, what is: 1- the concept and 2-the  
standard method of sharing the load?  (Mast is 4' above & 6' below the  
Many tnx.
73, Paul W3PL

via 3G

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>