[Top] [All Lists]

Re: [TowerTalk] Ham IV

To: Darl Deeds <>
Subject: Re: [TowerTalk] Ham IV
From: Dennis Vernacchia <>
Date: Fri, 12 Jun 2009 23:57:45 -0700
List-post: <">>

Easy to replace - just remove top cover

It uses a type 1819 and if U neber want to have to replace the bulbs again
this advice from K6EL in a previous post

He wrote:

You may want to replace it with a direct replacement LED.
I just was alerted to this web page and it is awesome! I ordered a
couple for the box to check them out and they are very high quality. No
minimum order and very quick service.

73, Dennis N6KI

On Fri, Jun 12, 2009 at 6:42 AM, Darl Deeds <> wrote:

> Hi all. I have a Ham IV rotor from Hygain. I have the version that has two
> bulbs in the control box. Both bulbs have blown. I see nothing in the manual
> about changing them and in looking at them it looks like a total pain to
> change them. Are there any suggestions for an alternative or a good way to
> change them.  Thanks in advance.
> Darl   NA8W
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>