You will have to know how old... in my original 1032 there was no pot, it
counted gear teeth. That drive has since been rebuilt to use the same
controllers as the newer 1122's which I think have the same 500 ohm pot as
the 1022's. I can't guarantee that these are the same, but I bought some
clarostat 73ja-500 ones years ago for the older 1022's. these are 10 turn
linear taper pots with the standard mounting and shaft drive. Carl does
reply to email but sometimes it gets lost in his spam filter, try carl at
David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Henk Remijn PA5KT [mailto:email@example.com]
> Sent: Friday, June 19, 2009 15:31
> To: Tower Talk
> Subject: [TowerTalk] Tic rotor potmeter replacement?
> I own a Tic rotor 1032 and the potentiometer stopped working. I know it
> can be a cabling problem, but if the potmeter is the problem I want to
> have the right parts available I would like to buy a replacement potmeter.
> Does someone know what potmeter is inside?
> 73 Henk PA5KT
> Henk Remijn PA5KT
> email: firstname.lastname@example.org
> www: www.remijn.net
> TowerTalk mailing list
TowerTalk mailing list