RTV Silicone Seal.
Quoting Gerry <firstname.lastname@example.org>:
> I'm using a DX Engineering radial plate with radials that tie to the
> plate with 1/4" SST hardware. I have sealed each ring lug, bolt, and
> hardware on the topside of the plate with liquid electrical tape. I've
> noticed that this is deteriorating because of the heat/humidity and UV
> rays here in Austin, Texas. The liquid tape is cracking/splitting and
> also lifting up off of the SST radial plate.
> I've found Star Brite liquid electrical tape on some marine websites,
> but the specs only say it's UV proof. I'm wondering what temperature
> extremes it's also good for.
> Do any of you have some suggestions about what to use to seal the radial
> wires/hardware to the radial plate?
> Gerry Moravec - WD5AAM
> TowerTalk mailing list
TowerTalk mailing list