Towertalk
[Top] [All Lists]

Re: [TowerTalk] Questions about the HyGain HyTower theory of operation

To: Dan Schaaf <dan-schaaf@att.net>
Subject: Re: [TowerTalk] Questions about the HyGain HyTower theory of operation
From: n8de@thepoint.net
Date: Wed, 24 Jun 2009 20:11:01 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Answers inserted below:

Quoting Dan Schaaf <dan-schaaf@att.net>:

> Hello to the group.
>
> I am considering making a homebrew HyGain HyTower.
> My first questions is this:
> The stinger at the top is not electrically connected to the top of   
> the tower? It is insulated and there is a wire that runs from the   
> base to the stinger. In the manual, it is called the "80 meter wire".
>
> I am wondering why they did this instead of just electrically   
> connecting the bottom of the stinger direct to the top of the tower.
> Does anyone know the answer?

That is so the 'tower' can act as a 40m radiator.  The 'stinger' does  
not radiate on 40m.

>
> Next question: Has anyone tried to make a 60 meter stub for this antenna?

If you wish to use the antenna on 60m, you will need to find a way to  
make the tower + additional 'stub' resonate on 60m without disrupting  
the 40m resonance.

> Last question: Does one really need 3 x 3 x 3 ft of concrete to hold  
>  up a tiltover 100 lb. tower and stinger such as this antenna?

Use the K7LXC directive:  DO WHAT THE MANUFACTURER SAYS.

One cubic yard of concrete holds up the tower against tilting forces  
in strong winds.  It's a MINIMUM amount of concrete.

Good luck
Don
N8DE
>
>
> Vy 73, Dan K3ZXL
> http://www.k3zxl.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>