Towertalk
[Top] [All Lists]

Re: [TowerTalk] radials

To: <k4fj@aol.com>, "Towertalk e-Goups" <towertalk@contesting.com>
Subject: Re: [TowerTalk] radials
From: "Dave - AB7E" <xdavid@cis-broadband.com>
Date: Mon, 13 Jul 2009 19:46:45 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
You might even get by with something like this ...

http://tinyurl.com/mv8nsy

73,
Dave   AB7E



------Original Mail------
From: "Dave - AB7E" <xdavid@cis-broadband.com>
To: <k4fj@aol.com>,
    "Towertalk e-Goups" <towertalk@contesting.com>
Sent: Mon, 13 Jul 2009 18:24:47 -0700
Subject: Re: [TowerTalk] radials


I haven't had the need to use one for a long time, but at least here in Arizona 
it used to be possible to rent a small gas-engine powered Ditch Witch trencher 
designed specifically for laying PVC lawn sprinkler lines.  It was built kind 
of like a roto-tiller with a handle and two wheels, and with digging blades 
between the two wheels that cut about a two inch wide trench several inches 
deep.  If you held the handle such that the blades only dug an inch or so deep, 
you would be able to cut the groove as fast as you are able to walk.  They 
don't work well at all in rocky ground like at my current QTH but they are very 
easy to use in decent soil, and I've seen them work well even in hard ground if 
there aren't rocks.  I think it would at least be worth checking your local 
rental places to check.

73,
Dave   AB7E




------Original Mail------
From: <k4fj@aol.com>
To: <towertalk@contesting.com>
Sent: Mon, 13 Jul 2009 17:18:16 -0400
Subject: [TowerTalk] radials

I am planning a 160M vertical with radials.? I am looking for a device that 
will attach to my tractor's 3 point hitch and cut a narrow and shallow slit in 
the ground.? I know Verizon using something similar but it also feeds the wire 
in the trench and it is?deeper than what I desire.

I understand about laying radials on the ground and letting grass grow over 
them so they disappear.? I have done that and it works when you have grass or 
vegetation to grow.? The area I am planning to work has little vegetation so I 
want to lay the wire in a shallow slit and tack it down with lawn staples or 
similar.? I do not want the radial wire laying on the surface.

Please advise if you know of a tractor implement or other device?that may meet 
my needs.? I could use my old suburban edger with a batch of blades but that 
isn't a lot of fun in Virginia summer heat, but it is a backup plan.

The shallow slit could be one to two inches and make me really happy.

73, Steve, k4fj

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>