Towertalk
[Top] [All Lists]

Re: [TowerTalk] Seperation of towers

To: towertalk@contesting.com, misc@littleswanlake.com
Subject: Re: [TowerTalk] Seperation of towers
From: K7LXC@aol.com
Date: Wed, 22 Jul 2009 20:09:28 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 7/22/2009 12:02:55 P.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  I have an HDX 555 tower with a TH11DX on it.  I am  thinking about 
adding a
40 meter beam and I have two choices as I see  it.  One is to place it above
the TH 11 on the same tower.  The  second choice is to add a second tower.  
I
would probably use the HDX  555 again.  The second tower would have to be
north and east of the  first tower.  That would be in the direction of about
75% of my  contacts at that location.  I could move the TH 11 to that
location  and put the 40 meter beam behind it if that would help but I am
concerned  about interactions of the beams. The most separation I would have
would be  about 50 feet tip to tip of the beam.   If I put them on the  same
tower, what is the amount of separation I would need?  If I put  them on
different towers, how far apart must they reasonably be.  I  know the 
further
the better but is there some rule of thumb of not closer  than ... . 

Well, separate towers are  always easier and cleaner in several respects. 
In lieu of the work and cost to  install another tower, putting it on the 
existing tower certainly would be  easier. It looks like Warren County is a 75 
MPH windspeed zone so you might be  pushing the capacity of the HDX 555 
somewhat. What is the tower rating at 75  MPH? I'd put it on an existing tower 
if possible. 

>  I now use  a HY Tower for 40 and it works fine but I am thinking a beam 
on 40
would be  an improvement.  I am thinking I will use the four element M2 or
the  two element Hy Gain.  


    Skip the Hy-Gain. It had problems with some  element insulators or 
something. It's been awhile since it's been a topic of  discussion so I don't 
quite remember. 
 
    The one shorty forty to own is the Cushcraft.  Easy to assemble, adjust 
and pretty danged reliable. That's the one I'd buy  and use. 
 
    I've never been a big fan of any linear loaded  design (e.g. F12, M2) 
but it might be worth the extra cost. K8IA likes his.  

Cheers,
Steve     K7LXC
TOWER TECH 





**************What's for dinner tonight?  Find quick and easy dinner ideas 
for any occasion. 
(http://food.aol.com/dinner-tonight?ncid=emlcntusfood00000009)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>