[Top] [All Lists]

Re: [TowerTalk] Antenna lead-in, lead-out pass throughs

To: John Hensley <>,<>
Subject: Re: [TowerTalk] Antenna lead-in, lead-out pass throughs
From: Jack <>
Date: Fri, 16 Oct 2009 16:12:30 -0400
List-post: <">>
Check DX Engineering.  They got the box and all the fixins!

At 09:42 AM 10/16/2009, John Hensley wrote:

>Before I reinvent another wheel :-) , can anyone send me a picture 
>or two of how you did your outside to inside antenna panel?  My 
>ideais to put an external service box on the outside of the workshop 
>withtwo or three 2" nipples passing through to an inside box.  The 
>outsidebox could hold a couple of small auto-wire tuners & baluns 
>and theinside box could accommodate a small patch panel, extra 
>ground connection,etc.
>If you don't have any pictures, perhaps a short description of what 
>youfound worked best for you.  I do not want to do window or eave passthroughs.
>TIA< John, W5JV

Jack Hartley
DXCC Honor Roll
"Celebrating 50 years in Ham Radio"

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>