:::: Thanks very much Joe, as well as the others.
Your info told me just about everything I needed to know.
The last tower I put in we actually hit no significant rock, but that was in
NJ, this is Tennessee.
Mike, WA2VUN, welded an enormous rebar cage that went in the hole that was
I recall it took 2 full cement truck loads, which I think came to 15 yards or
It was 140' free standing military solid bar tower.
This little tower is a small project compared to that one!
Thanks again for the help.
Tower Talk is indeed a great resource.
----- Original Message -----
From: Joe - WDØM
Cc: Bill K2OWR
Sent: Thursday, December 10, 2009 10:22
Subject: Re: [TowerTalk] Fw: tower base question
I went through something close to what you're experiencing, but the rock on my
5 acres is just 6 inches under the soil. You can see how I did it on my web
Click on "Ham Radio", then on "Tower Project".
Hope that helps....if you have questions, let me know.
My entire property seems to contain a serious rock shelf about 3' down
everywhere I dig.
I would like to dig a hole down to that rock surface, then drill and
install some rebar or something before I pour concrete in order to
anchor to the rock at least a little.
I plan to gin pole the tower up as I have done several times in the
I don't think I need the sort of base I put in for free standing
crankups , since this one will be seriously guyed 3 ways at 3 points
So mostly the base is for support from sinking. My plan is to
attach/weld some rebar to one section, then sink it into the hole and
fill with concrete.
Since I can only get three feet down I was thinking maybe I could
drill and epoxy some rebar into that rock and just pour around the
tower section I put in there.
Does this make sense?
If not, what do you recommend?
If it does, do I just drill holes and lay in the rebar? What do I use
TowerTalk mailing list