[Top] [All Lists]

Re: [TowerTalk] AB-577 AB-621 Winch Motor

To: "'Ed G'" <>, <>
Subject: Re: [TowerTalk] AB-577 AB-621 Winch Motor
From: "Jim Chaggaris" <>
Date: Wed, 16 Dec 2009 17:12:20 -0600
List-post: <">>

What a great question!  I was thinking about doing something like this for
my Ab-577.  My rotator cuffs would thank me...

Jim N9WW

James Chaggaris
PowerOne Corp./PowerOne Environmental
1020 Cedar Avenue
Suite 203
St. Charles, IL 60174
Phn: (630) 443-6500
Fax: (630) 443-6505

The information contained in this message is intended only for the personal
and confidential use of the recipient(s) named above. If the reader of this
message is not the intended recipient or an agent responsible for delivering
it to the intended recipient, you are hereby notified that you have received
this document in error and that any review, dissemination, distribution, or
copying of this message is strictly prohibited. If you have received this
communication in error, please notify PowerOne Corporation immediately, and
delete the original message.

-----Original Message-----
[] On Behalf Of Ed G
Sent: Wednesday, December 16, 2009 5:08 PM
Subject: [TowerTalk] AB-577 AB-621 Winch Motor

Hi Folks,
     Has anyone ever used a small motor to crank the mast up on an AB-577 or
621?  If so, are there any recommendations for a particular motor type or
mfgr?  Seems like it would be easy to couple the motor to the gearbox using
a 1/2 inch shaft and coupling.


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>