Towertalk
[Top] [All Lists]

[TowerTalk] CommScope WBC400

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: [TowerTalk] CommScope WBC400
From: "Mark Robinson" <markrob@mindspring.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Fri, 5 Feb 2010 13:38:01 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I am looking at buying a CommScope WBC400 Coax Cable Bulk Reel of 1,000 
Feet. I would be using this coax to run out to my 40m 4 Square in my back 
field about 250 feet away. I am also planning on running it up my 100 foot 
tower to feed a 20m through 6m beam. I might use it to make up patch cables 
in my shack.

Is this a good cable to use. I see that the center conductor is copper 
plated aluminum. Will this be an issue and would soldered PL-259's be OK to 
use with this cable.

thanks Mark N1UK 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>