If you don't already have them, save yourself a LOT of time and trouble and
pick up the stripper and deburring tools for the cable size you are working
Times also has a relatively new compression type connector like you are
talking about. I've used them for LMR600 and they are much much nicer than
the older style. All you need to build a perfect connection these days are
the strippers, a pair of nail scissors, razor knife and a couple of Crescent
wrenches. Very cool and very fast :-).
I've cc'd Lee at Hutton (Electro-comm) on this. I've purchased all of my
cable from them for a very long time. Good prices and great service!
Hope that helps,
----- Original Message -----
From: "Dan" <email@example.com>
Sent: Tuesday, February 09, 2010 4:15 PM
Subject: [TowerTalk] N Connectors
> Ten years or so ago when I lived in Dallas, I picked us several type N
> connectors of an unusual construction. They resembled
> PL259's in appearance. They unscrewed into 2 parts. The center pin was
> held in a teflon cylinder in the cable attach part. They are easier to
> use than conventional N connectors. Does anyone know where these can be
> purchased today?
> 73, Dan, N5AR
> TowerTalk mailing list
TowerTalk mailing list