Towertalk
[Top] [All Lists]

Re: [TowerTalk] Band Color Codes

To: <towertalk@contesting.com>, <yccc@contesting.com>
Subject: Re: [TowerTalk] Band Color Codes
From: "Larry Banks" <larryb.w1dyj@verizon.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Mon, 15 Feb 2010 11:08:41 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
My apoligies -- I should have gone a bit farther up in converting SHF 
frequencies to cm!
Larry



----- Original Message ----- 
From: <TexasRF@aol.com>
To: <towertalk@contesting.com>; <yccc@contesting.com>
Sent: Monday, February 15, 2010 11:00 AM
Subject: Re: [TowerTalk] Band Color Codes


>
> Well, we do have a 9cm band and there are at least six of us using it here
> in the USA. I don't think your suggestion would bother the other 300,000 
> or
> so  hf/vhf operators though.
>
> 73,
> Gerald K5GW
>
> In a message dated 2/15/2010 9:47:02 A.M. Central Standard Time,
> larryb.w1dyj@verizon.net writes:
>
> Interesting idea!
>
> Since no current band has a 9 in it, you  could substitute white for black
> and go "EIA" -- this would cover the WARC  bands:
>
> 160M - brown, blue, white
> 20M - red, white
> 17M - brown.  violet
> 12M - brown, red
> 6M - blue
> 23cm -- white, red, orange (the  leading white indicates cm)
>
> etc.
>
> Of course, this could be tough  for a multi-band antenna...
>
> Actually, what I use now are the numbered  wire labels that electricians
> use -- you can find booklets of them in your  local home depot, etc, in 
> the
> electrical dept.  Mine are called  "Brady Porta-Pack Wire Markers" 
> although
> I
> don't know what the current  brands would be as I picked these up about 50
> years ago...  (One pack  lasts a long time.)
>
> 73 -- Larry -- W1DYJ
>
>
>
>
> -----  Original Message ----- 
> From: "Tony Brock-Fisher"  <barockteer@aol.com>
> To: "Towertalk"  <towertalk@contesting.com>; <yccc@contesting.com>
> Sent: Monday,  February 15, 2010 9:50 AM
> Subject: [TowerTalk] Band Color  Codes
>
>
>>I apologize if this may have been discussed  before....
>>
>>
>> Thinking of standardizing on a set of color  codes for bands on coax,
>> switches, filters, etc.
>>
>>  What's the best choice?
>>
>> I'm ruling out black as a choice,  because black tape on black coax is
> hard
>> to see.
>> I don't do  WARC bands so they are not included in my choices.
>>
>> Some of my  thoughts are:
>>
>> (sort of) EIA color codes:
>> first digit  of band is resistor color code, with exceptions as noted
>>
>>  10-brown
>>
>> 15-green  (only band with a '5')
>>
>>  20-red
>>
>> 40-yellow
>>
>> 80-blue
>>
>>  160-orange (only bright color left)
>>
>>
>>
>> (or just  simple mapping, in ascending order of frequency)
>>
>>  160-brown
>>
>> 80 - red
>>
>> 40 - org
>>
>> 20  - yellow
>>
>> 15 - green
>>
>> 10 -  blue
>>
>>
>>
>> (and in order of  wavelength)
>>
>> 10 - brown
>>
>> 15 -  red
>>
>> 20 - org
>>
>> 40 - yellow
>>
>> 80 -  green
>>
>> 160 -  blue
>>
>>
>>
>>
>>
>> Or maybe there's a  better, simple idea out there...
>>
>>
>>
>> -Tony,  K1KP
>>  _______________________________________________
>>
>>
>>
>>  _______________________________________________
>> TowerTalk mailing  list
>> TowerTalk@contesting.com
>>  http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk  mailing  list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>