Towertalk
[Top] [All Lists]

Re: [TowerTalk] Shunt Fed Tower - 160 Meter Gamma Match Question

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Shunt Fed Tower - 160 Meter Gamma Match Question
From: Larry K4AB <larry.k4ab@gmail.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Mon, 15 Feb 2010 10:50:26 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Chuck,

I've installed a lot of 160 shunt feeds.  I would start by raising the gamma
attachment point.

Usually 2/3 the height of the tower would be fine. In your case 90' should
work well.

GL!

73,
Larry K4AB

On Mon, Feb 15, 2010 at 10:35 AM, Chuck <w5pr@swbell.net> wrote:

> I am trying to shunt feed a tower for 160 meters.  I have a 135' Rohn 55
> tower with several good sized antennas on it.  Guys are insulated.  I have
> run an old piece of coax up 35' about 2' off the tower for a gamma.  I have
> about a 150 pf variable in series and 200 pf to ground.  Ground is 2 -140
> foot radials, elevated 10'  (In the past I think I have used larger
> capacitors for this.)
>
> I do not get any match on the series variable with 200 pf, 100 pf and 0 pf
> to ground.
>
> What is the easiest thing to do now?
>
> 1.  Shorten the radials?
> 2.  Increase the series capacitance?
> 3.  Increase the capacitance to ground?
>
> Is my gamma too short?
>
> Thanks!
>
> Chuck W5PR
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>