[Top] [All Lists]

[TowerTalk] 25G questions.

Subject: [TowerTalk] 25G questions.
Reply-to: "Tower and HF antenna construction topics." <>
Date: Mon, 22 Feb 2010 20:00:29 EST
List-post: <">>
I want to erect a Rohn 25G tower,  30 ft above ground. A small  3  el  
tribander on it.  I have to satisfy my county engineers as to the  safety of 
tower installation. It will also be bracketed to the house in two  
Problem is, I cannot really go 3 ft by 3 ft, by 4 ft deep for a  
hole/concrete.  The tower is too close to my house. Rohn makes a  
that sits in concrete, the legs of the tower slip over  that.  Would that be 
of any use to me, rather than bury 3 ft of tower in  concrete?
What is the minimum size hole I can dig, considering it is only 30 ft tall, 
 and has a tribander  (CushCraft A3) on top.
Right now, the tower sits on 3-- 3/4 inch pipes  buried 3 ft deep,,,  tower 
slips over those, they are simply pounded into the hard AZ ground. Then  
bracketed to the house in two directions. It  is solid as a rock, but...  not 
sure that would satisfy the "engineers". One thing they want to make sure  
of, is that it wont fall off your property, mine wont, by a long shot. 
I need some  "expert advice".  They ask for Mfgr specs, I cant  find any 
for a 30 ft tower,  bracketed. 
Bob wa7dxz  DM33

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] 25G questions., WA7DXZ <=