My solution was to add an Idiom Press EZ-Rotor mod with serial IO to the
rotor control. Now I can control the rotor from any PC on the net. (I
actually have all three of my rotor on serial ports).
----- Original Message -----
To: <email@example.com>; <firstname.lastname@example.org>
Sent: Wednesday, February 24, 2010 7:40 PM
Subject: [YCCC] Dual rotor controllers
> Hello All,
> I asked this question years ago and got replies.
> However, I can't find them. Guess they are on an
> old computer.
> Anyway, I would like to know how I can connect
> two (2) controllers to one antenna rotator???
> The rotator is a HAM-4 and I have 2 controllers.
> I want to be able to control the rotor from 2 different
> operating positions...
> As I recall, you need to take the fuse out of one of
> the controllers. I don't remember anything else...
> Any help would be very much appreciated.
> Thank in advance.
> Ted K2QMF
> P,.S. - I tried the archives with no luck.
> Senior Assisted Living
> Put your loved ones in good hands with quality senior assisted living.
> Click now!
> YCCC Reflector mailto:email@example.com
> Yankee Clipper Contest Club http://www.yccc.org
> Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
TowerTalk mailing list