Good Morning Wayne,
I used an old antenna program called Yagi Max.I recently acquired Eznec3.0
but have not had a chance to learn how to use it.
My tower is 114 ft tall including mast, Rhon 45. Using yagi max I tried 1
wave, 0.5 wave and 0.75 wave length apart. I then tried various spacing
between ant. 1 and 2, and 2 and 3. I settled on a distance of 1 wave
between 1 and 2 (2.44 and 1.82 wave heights), with 5/8 wave between 2 and 3
(1.82 and 1.19 wave heights) . This gave me the fewest lobes off the back
side and 14.32 dbi. forward gain. According to yagi max this spacing
developed a nice low angle main lobe and 2 minor lobes at about 45 degrees.
I am not an antenna specialist but I considered this to be the cleanest
pattern both forward and reversed that I desired. Other spacings showed more
minor loabes off the front and back patterns. The final spacing 113 ft, 84.1
ft, and 55.2 ft. using the available space on my tower. Scientific study,
no, but it works for me.
Hope this makes some since.
TowerTalk mailing list