Thanks for the info.
I will look into this as well...
On Wed, 24 Feb 2010 23:14:41 -0500 "Tony Brock-Fisher"
> My solution was to add an Idiom Press EZ-Rotor mod with serial IO to
> rotor control. Now I can control the rotor from any PC on the net.
> actually have all three of my rotor on serial ports).
> ----- Original Message -----
> From: <firstname.lastname@example.org>
> To: <email@example.com>; <firstname.lastname@example.org>
> Sent: Wednesday, February 24, 2010 7:40 PM
> Subject: [YCCC] Dual rotor controllers
> > Hello All,
> > I asked this question years ago and got replies.
> > However, I can't find them. Guess they are on an
> > old computer.
> > Anyway, I would like to know how I can connect
> > two (2) controllers to one antenna rotator???
> > The rotator is a HAM-4 and I have 2 controllers.
> > I want to be able to control the rotor from 2 different
> > operating positions...
> > As I recall, you need to take the fuse out of one of
> > the controllers. I don't remember anything else...
> > Any help would be very much appreciated.
> > Thank in advance.
> > 73,
> > Ted K2QMF
> > P,.S. - I tried the archives with no luck.
> > ____________________________________________________________
> > Senior Assisted Living
> > Put your loved ones in good hands with quality senior assisted
> > Click now!
> > _______________________________________________
> > YCCC Reflector mailto:email@example.com
> > Yankee Clipper Contest Club http://www.yccc.org
> > Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
> TowerTalk mailing list
Cheap Diet Help Tips. Click here.
TowerTalk mailing list