[Top] [All Lists]

Re: [TowerTalk] Polyphaser

To: <>, "Tower and HF antenna construction topics." <>
Subject: Re: [TowerTalk] Polyphaser
From: "Glenn Thorne" <>
Reply-to: "Tower and HF antenna construction topics." <>
Date: Tue, 16 Mar 2010 12:55:08 -0500
List-post: <">>
I use the same Polyphaser and my MJF-259B works just fine through it.  

73, Glenn/KD0Q

----- Original Message ----- 
From: "w4lde" <>
To: "TowerTalk" <>
Sent: Tuesday, March 16, 2010 11:53 AM
Subject: [TowerTalk] Polyphaser

>I am installing new coax from the tower to the shack and have inserted a 
> polyphaser IS-50NX-CO,  N-style connector and wanted to check everything 
> out from the shack to the tower before I connect it to the beam.  The 
> polyphaser is located at an entrance panel some 30' from the shack.
> The unit is not new but did come in the original box with all hardware 
> and instructions, however, how do I check out the unit to know if its 
> still good?
> This is a DC blocking style so there's no connection between center 
> pins, I have a MFJ antenna analyzer but I don't think it sees past the 
> polyphaser fro the shack end.
> How does one know if the unit is OK or not?  There is a varied opinion 
> as to there worth and maybe I should select a different product.  I 
> always disconnect the antennas in the shack but wanted to add some 
> protection at the building entrance plus I can also disconnect the coax 
> and also the rotor cables there.
> 73 de
> Ron W4LDE
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>