Try Irfanview to look at the DWG file. If you don't have it you can go to
http://www.irfanview.net/ and download a free copy.
----- Original Message -----
From: "Dennis Vernacchia" <firstname.lastname@example.org>
To: "towertalk" <email@example.com>; "CQ-Contest"
<firstname.lastname@example.org>; <email@example.com>; "SCCC Reflector"
Sent: Friday, March 19, 2010 1:19 PM
Subject: [TowerTalk] Has Anyone Rebuilt ( New Seals ) a Hub City W300
orsimilar Crank Up Tower Gearbox ?
> Typically used on 70 ft motorized crank up towers like Tri-Ex (
> Tashijian )
> Or...if you have not rebuilt one - where did you take to get gearbox
> for leaky seals ?
> and what was cost ?
> I would appreciate if you could forward this info request to anyone you
> might have the answer ?
> Pix of it can be seen on Page B6 at *
> http://www.hubcityinc.com/documents/6b-wormgeardrives.pdf *
> First Item "W-Series "
> I also have a 58K CAD Drawing file I downloaded from Hub City site but can
> not view with
> my Paint Shop Pro Version 7 software ( W300.DWG file ) - Antone know what
> ( hopefully shareware ) I can view with so I don't have to load Auto CAD !
> Got the file here *http://www.hubcityinc.com/wormgear.html* and
> it is supposed to
> be able to be viewed in Paint Shop Pro - I must not have that module
> 73, Dennis N6KI
> TowerTalk mailing list
TowerTalk mailing list