[Top] [All Lists]

[TowerTalk] M2 OR2800PDC question

Subject: [TowerTalk] M2 OR2800PDC question
From: Ed Stallman <>
Reply-to: "Tower and HF antenna construction topics." <>
Date: Fri, 19 Mar 2010 22:35:41 -0500
List-post: <">>
Hello gentlemen , has anyone experienced this ?

The problem I'm having with my M2 rotor is it comes to an abrupt stop 
were ever it likes !  If I'm setting at 180 degrees and hold the CCW 
button to set to turn to 30 degrees , any were in between it will 
stop, never stopping in the same place twice.  holding the CCW button 
again to get to the 30 degree position , nothing happens it will not 
turn CCW at this point. It will turn CW but again it's going to stop 
who knows where.

I have called M2 and the man I spoke with seams to think that the 
limit switch may have fallen and possibly a gear is hitting the limit switch.

The first pretty day I will bring the rotor down.

I have not been inside the M2 rotor before and would like to know 
what to watch out for , can someone pass along some helpful tips please.

I'm sure this is something I can repair my self , I've repaired my 
1984 Tailtwister a couple of time .

Thanks Ed N5DG


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>