Thanks Everyone for all the good info on and off the reflector, I'm
now prepared first pretty day to check things out .
At 10:35 PM 3/19/2010, you wrote:
>Hello gentlemen , has anyone experienced this ?
>The problem I'm having with my M2 rotor is it comes to an abrupt stop
>were ever it likes ! If I'm setting at 180 degrees and hold the CCW
>button to set to turn to 30 degrees , any were in between it will
>stop, never stopping in the same place twice. holding the CCW button
>again to get to the 30 degree position , nothing happens it will not
>turn CCW at this point. It will turn CW but again it's going to stop
>who knows where.
>I have called M2 and the man I spoke with seams to think that the
>limit switch may have fallen and possibly a gear is hitting the limit switch.
>The first pretty day I will bring the rotor down.
>I have not been inside the M2 rotor before and would like to know
>what to watch out for , can someone pass along some helpful tips please.
>I'm sure this is something I can repair my self , I've repaired my
>1984 Tailtwister a couple of time .
>Thanks Ed N5DG
>TowerTalk mailing list
TowerTalk mailing list