It's s joint document between ANSI and IEEE. Apparently, it's a compendium
of three sections in total, one of them discussing installation practices.
----- Original Message -----
From: "jimlux" <email@example.com>
To: "Tower and HF antenna construction topics." <firstname.lastname@example.org>
Sent: Sunday, March 21, 2010 4:11 PM
Subject: Re: [TowerTalk] Shack wiring
> Paul Christensen wrote:
>> I'm trying to locate a current copy of IEEE C62.41.1, "Guide on the Surge
>> Environment in Low-Voltage (1000 V and less) AC Power Circuits." Anyone
>> know whether or not that publication recommends the use of SPDs beyond
>> service panel on the load side of distribution up to the point of
>> Paul, W9AC
> That looks like an ANSI number (not that IEEE isn't involved..).
> From a few googles, it looks like it defines a set of "standard
> environments" to be used as design or test requirements, rather than a
> "recommended practice".
> "This is a guide describing the surge voltage, surge current, and
> temporary overvoltages (TOV) environment in low-voltage [up to 1000 V
> root mean square (rms)] ac power circuits. This scope does not include
> other power disturbances, such as notches, sags, and noise. "
> Earlier editions in the series talk about recommended practice, but the
> recommended practice is for "testing" not "installation".
> Sort of like UL1149 describes test methods for TVSS, not performance
> For usage, Standler's book:"Protection of Electronic Circuits from
> Overvoltages" is the hot ticket.
> It's also on google books, so maybe the pages that are visible that way
> give you useful knowledge.
> TowerTalk mailing list
TowerTalk mailing list