[Top] [All Lists]

Re: [TowerTalk] cutting oil

Subject: Re: [TowerTalk] cutting oil
From: Michael Germino <>
Reply-to: "Tower and HF antenna construction topics." <>
Date: Wed, 24 Mar 2010 09:52:47 -0700 (PDT)
List-post: <">>

I knew an old commercial farm welder.  His shop was an old barn with dirt 
floors, this is why this worked.  He used water coming out of a quarter inch 
copper line.  Lots of water.  He just wanted to keep the bit cool and he oiled 
the bits after use. (Large bits well over an inch)

I have never done this and have never seen it elsewhere, so.... your mileage 
may vary.



TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>