I got 15 plates with the AB-105 hardware. I'll only need 6 of them for
the 2 towers I'm putting up. Since I have them and they are rusty, I'm going
to enlarge the holes before I get them hot dipped.
If you know someone who needs some AB-105 hardware, I'll have some nice
galvanized plates left over.
> From: K7LXC@aol.com
> Date: Wed, 24 Mar 2010 13:44:13 -0400
> To: firstname.lastname@example.org; email@example.com
> Subject: Re: [TowerTalk] Drill bits
> Here's my 2 cents worth. I'd use a small bit for a pilot hole and then use
> a step-drill (e.g. Unibit) to get it to the desired size. Those
> step-drills will enlarge it to a nearly perfect round hole in short order.
> What are you building that you need 140 holes for? Sounds kind of
> ambitious - hi.
> Steve K7LXC
> TOWER TECH
> TowerTalk mailing list
Hotmail: Trusted email with powerful SPAM protection.
TowerTalk mailing list