Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ground rods with jack hammer drill

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Ground rods with jack hammer drill
From: Ron Bowman <w8vzmron@gmail.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Tue, 30 Mar 2010 20:06:53 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Patrick,
I used a hammer drill to install ground rods at my old QTH in the southern
Ohio hills. It allowed me to get the rod about another foot down than I was
able to with a sledge hammer. I expect that we hit the rock ledge that is
common in that area. Evidently i got that rod and the others into the rock
well. I did notice a reduction in noise upon connection of the new rod. My
friend who works for the local electric utility checked out the ground an
said it was a much better ground resistance on his meter (ground tester).
than it was before. Go for it!
Ron W8VZM

On Tue, Mar 30, 2010 at 7:48 PM, Barrie Smith <barrie@centric.net> wrote:

> I had an electrician friend drive an 8' ground rod for my K9AY loop a
> couple
> of months ago using an electric Hilti unit that hammers quite vigorously.
>
> Lots of rock in my soil.  It took him quite a while, and there were a
> couple
> of times that we didn't think it was going to go.  But it did.
>
> This grand adventure took place line-of-sight from your location up on the
> south hills of Missoula.
>
> 73, Barrie, W7ALW, DN36at
> ----- Original Message -----
> From: "Patrick Barkey" <n9rvee@gmail.com>
> To: <towertalk@contesting.com>
> Sent: Tuesday, March 30, 2010 4:00 PM
> Subject: [TowerTalk] Ground rods with jack hammer drill
>
>
> > Has anyone on this list ever tried installing ground rods in rocky soil
> > with
> > a big jack hammer drill?  What I had in mind was replacing the big with
> > the
> > ground rod and driving it in.  Having zero luck in this rocky stuff
> called
> > soil in western Montana.
> >
> > I am thinking of one of those big Hilti things with a jack hammer
> setting:
> >
> >
> http://www.amazon.com/dp/B0036SCVSM/ref=asc_df_B0036SCVSM1071795?smid=A1QNWKKF9WDH43
> >
> >  - Pat
> >    N9RV
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>