Hi Doug -
I built a carriage system for my 100 foot tower. The tower is quite
substantial and guyed at 30/60/90. What I do is lower to 90. Disconnect the
90 guys at the anchor and lower to 60. Disconnect the 60's and lower to 30.
Climb to 30 and fish the 60's outside the carriage and reconnect to the
anchors. Disonnect the 30's and lower the carriage to ground level. With a
less substatIial tower you would want to start fishing the guys out and
reconnecting earlier in the game. You just have to wait for a calm day and
asses the situation. Any way you slice it, it's more than a trivial task.
Good luck, and 73's,
Gene / W2LU
----- Original Message -----
From: "Doug Snowden" <email@example.com>
To: "towertalk" <firstname.lastname@example.org>
Sent: Tuesday, March 30, 2010 11:22 PM
Subject: [TowerTalk] Yet another Hazer Guying Question
>I have been thinking about putting up a Rohn25 with a homemade steel
> welded Hazer. From what I have read, if you do not want to do any
> climbing with the
> Hazer above you, the tower will be temporarily self supporting because you
> need to drop a couple of guys until the assembly is lowered below it.
> Doug, N4IJ
> TowerTalk mailing list
TowerTalk mailing list