[Top] [All Lists]

[TowerTalk] Cutting a section of 25G

Subject: [TowerTalk] Cutting a section of 25G
From: "John Lyles" <>
Reply-to:, "Tower and HF antenna construction topics." <>
Date: Fri, 2 Apr 2010 08:49:55 -0700
List-post: <">>
I used a Sawzall to cut off a 25G flush at the ground, just where it came out 
of concrete. It was fast, and I could bend the blade a bit to make it flat as 
possible. Wear goggles, it happens quickly. 

> Message: 4
> Date: Thu, 1 Apr 2010 17:36:56 -0400
> From: "Ed Swiderski, KU4BP" <>
> Subject: [TowerTalk] Cutting a section of tower
> To: "Tower Talk" <>
> Message-ID: <F1A4E5F85ED142A58DE66555EDCECF4B@ku4bp>
> Content-Type: text/plain;     charset="us-ascii"
> Feel that this is a dumb question but can a section of tower be cut with a
> hacksaw or would I need something stronger? I have a section of 25G that was
> cut prior to it was given to me and I wish to cut it to make a  5-ft short
> base section.


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Cutting a section of 25G, John Lyles <=