Richard (Rick) Karlquist wrote:
> You can get around this problem if you use a track
> mounted Hazer (I think GME calls it the Hazer 7).
> Used in conjunction with two or more levels of guying, you
> always have at least one set of guys in place. The
> track system also gets around the requirement that the
> tower be dimensionally near perfect.
>
Seems like one could be build that would work on a track off the face of
the tower without interfering with the guys.
73
Roger (K8RI)
> Rick N6RK
>
> K7LXC@aol.com wrote:
>
>>
>> In a message dated 3/30/2010 8:22:57 P.M. Pacific Daylight Time,
>> towertalk-request@contesting.com writes:
>>
>>
>>> I have been thinking about putting up a Rohn25 with a homemade steel
>>>
>> welded Hazer. From what I have read, if you do not want to do any
>> climbing with the Hazer above you, the tower will be temporarily self
>> supporting because you
>> need to drop a couple of guys until the assembly is lowered below it. True?
>>
>> Unfortunately yes. IMO it's a terrible technique although many people
>> do it.
>>
>> Cheers,
>> Steve K7LXC
>> TOWER TECH -
>> Professional tower services for hams
>>
>>
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|